Phase control relay EMR6-W500-D-1 EATON

Description Phase control relay EMR6-W500-D-1 EATON

Nominal operating voltage (Ue): 3 x 200-500 V alternating current
Nominal frequency: 50/60 Hz
Control functions: Phase loss, phase sequence, phase asymmetry, overvoltage, undervoltage
Overvoltage adjustment range (Umax): 1.05 - 1.25 Ue (regulation)
Low voltage adjustment range (Umin): 0.75 - 0.95 Ue (regulation)
Phase asymmetry adjustment range (Uunbal): 5% - 15% (regulations)
Hysteresis (overvoltage/undervoltage): 2% (fixed)
Hysteresis (phase asymmetry): 4% (fixations)
Cooling hour t1 (overvoltage, undervoltage, asymmetry): 0.1 - 10 s (adjustments)
Washing hour t2 (phase shaving, phase sequence): 0.1 s (fixations)
Renewal hour (after clearing the fault): approx. 500 ms
Output contact configuration: 1 changeover contact (SPDT)
Nominal operating current of contacts (AC-15, 230V): 3 A
Nominal operating voltage of contacts (DC-13, 24V): 1 A
Minimum switching capacity: 10 mA at 5 V DC
Maximum switching power (AC): 750 VA
Maximum switching power (DC): 30 W
Tension achieved: max. 3 VA
Mounting: DIN rail (EN 60715)
Case width: 22.5 mm (1 module)
Body height: 95 mm
Body depth: 102 mm
Protection level (clem): IP20
Protection level (front housing): IP40
Operating temperature range: -25 to +60 °C
Temperature range: -40 to +70 °C
Connection type: Screw terminals
Terminal capacity (wire conductor): 2x(0.5-2.5 mm²)
Terminal capacity (hard conductor): 2x(0.5-4 mm²)
Indication: LED indicators (life, relay state, fault type)
Compliance with standards: EN 60255-6, IEC 60947-5-1, IEC 60255-1