RUPD-12-G-O-M-0 manual control device

Description RUPD-12-G-O-M-0 manual control device

The manual control device for fire extinguishing, smoke removal and other automation (hereinafter referred to as the RUPD) is a device designed for manually switching on modes in the VEKTOR-1" fire control and control devices and others. RUPD are installed in closed rooms of various buildings and structures. RUPD is designed for continuous round-the-clock operation with a two- or three-wire fire alarm loop (hereinafter referred to as the SHPS) with a nominal SHPS supply voltage of 12 V or 24 V. RUPDs have a status indicator - a red LED located in the center of the working field (key). The next mode or initial state is induced by a flashing indicator, and operation or pressing - it lights up constantly. RUPDs may have a device mode (state) indicator - a blue LED located in the lower left corner of the front side. This indicator has an inscription with the mode or state that is induced. This indicator is powered by a separate loop.