Explosion-proof luminaire EXTRA-EX2/21-G-L12-840-7000-LM3-08-PD, BAJ 3 hours

Description Explosion-proof luminaire EXTRA-EX2/21-G-L12-840-7000-LM3-08-PD, BAJ 3 hours

EXTRA-EX2/21-G-L12-840-7000 - 
luminaire designed for use in environments with a risk of explosion according to IECEx/ATEX (zones 2/21, 22). The housing is made of durable polycarbonate (RAL 7035) with a silicone seal that does not degrade and has high resistance to chemicals, oils and weather conditions. The diffuser is made of highly durable opal polycarbonate resistant to ultraviolet and chemicals, which provides excellent brightness uniformity and reduced glare. Equipped with electronic components that guarantee a high specific power of up to 170 lm/W and a LED service life of up to 110,000 hours even at high temperatures. It is characterized by high resistance to splash water and dust IP66/IP67, as well as high impact resistance IK10. Suitable for ambient temperatures from -30 °C to +60 °C (depending on luminaire variant). Supplied as standard with stainless steel clamps and AISI304 stainless steel fixing tabs. Designed for surface and suspended mounting.

ADVANTAGES:
• European product – made in the Czech Republic
• ATEX/IECEx certification – zone 2/21, 22
• Can also be used for outdoor use
• Resistant to ultraviolet radiation
• LOOP-IN / LOOP-OUT – ready for installation of through wiring for connecting the luminaire without using luminaire connection boxes
• High specific power up to 170 lm/W

PARAMETERS:

Operating voltage:
220–240 V / 50/60 Hz AC, 220–240 V DC

Operating temperature:

-30°C≤ta≤55°C (0°C≤ta≤50°C for luminaires with emergency module)

Light source:
LED, 4000K, CRI +80, MacAdam3

Housing:
Plastic material PC (polycarbonate)

Diffuser:
PC (polycarbonate) opal

Mounting:
Direct mounting to the ceiling or wall of the illuminated space using two self-locking mounting tabs (standard equipment), suspension using wire or cable hangers.

Connection:
Screwless three-pole terminal block, maximum conductor cross-section 2.5 mm2.

Standard equipment:
2x explosion-proof plastic cable glands M20x1.5 for cable Ø 7-13 mm, 2x explosion-proof plastic cable plugs M20 and 2x stainless steel fixing pins (AISI304) for direct mounting of the luminaire on the mounting surface.

Estimated service life - LED modules:
L80B50 Ta max - 110,000 h
L90B50 Ta 25 - 110,000 h

EXTRA-EX2/21 - ATEX- (FTZÚ 25 ATEX 0056X)
Ex II 3G Ex nR IIC T6 Gc
Ex II 2D Ex tb IIIC T85°C Db

EXTRA-EX2/21 - IECEx - (IECEx FTZU 25.0020X)
Ex nR IIC T6 Gc
Ex tb IIIC T85°C Db

On request:
5000K/6500K – color temperature
SILICONE-FREE - on request

Luminaire modifications:

D2 - DALI2 luminaire
M3A - ON/OFF luminaire + emergency mode 3 h, AUTOTEST
LM3 - ON/OFF luminaire + emergency mode 3 h
LA3D2 - DALI2 luminaire + emergency 3 h, AUTOTEST
LM3D2 - DALI2 luminaire + emergency 3 h
LMD3D2 - DALI2 luminaire + emergency 3 h, DALI
ND-1F - ON/OFF luminaire + through-wiring 3x2.5 mm2
ND-3F - ON/OFF luminaire + through-wiring 5x2.5 mm2
D2-1F - DALI2 luminaire + through-wiring 5x2.5 mm2
D2-3F - DALI2 luminaire + through-wiring 7x2.5 mm2
LM3A-3F - ON/OFF luminaire + emergency 3 h, AUTOTEST + through-wiring 5x2.5 mm2
LM3-3F - ON/OFF luminaire + emergency 3 h + through-wiring 5x2.5 mm2
LA3D2-3F - DALI2 luminaire + emergency 3 h, AUTOTEST + through-wiring 7x2.5 mm2
LM3D2-3F - DALI2 luminaire + emergency 3 h + through-wiring 7x2.5 mm2
LMD3D2-3F - DALI2 luminaire + emergency 3 h, DALI + through-wiring 7x2.5 mm2