Circlip pliers with extended jaws QUATROS QS70760

Description Circlip pliers with extended jaws QUATROS QS70760

Specialized pliers with 90° curved jaws for working with master cylinders and calipers.

Functional Purpose

Specialized pliers for removing and installing internal circlips in deep cavities of master cylinders and brake calipers.

Compatibility

Ideal for motorcycle hydraulic master cylinders, brake calipers, as well as for fork circlips.

Description QS70760

The QS70760 Internal Circlip Pliers are a specialist tool for workshops servicing motorcycles, cars, and trucks. These pliers have 90° curved jaws and a 56 mm working length, which allows you to reach the circlips in the deep cavities of clutch and brake master cylinders.

Trying to extract a circlip from a deep cavity with conventional pliers often results in damage to the circlip, scratches on the cylinder mirror, and the inability to complete the job. The QS70760 completely solves this problem: the 90-degree bend of the jaws provides direct access to the circlip deep inside, the spring mechanism makes work easier, and the molded handles ensure comfortable use.

Application

• Motorcycles: Hydraulic clutch/brake master cylinders – Removing/installing circlips
• Passenger cars: Brake calipers – Replacing circlips when installing new pistons
• Motorcycles: Forks – Fork oil seal circlips
• General: Any assembly – Internal circlips up to 56 mm deep

⚠️ Important: Use pliers only for the correct size circlips. Do not use excessive force – this may damage the circlip or the tool.

When to Use These Pliers

• When replacing brake caliper pistons on passenger cars.
• When servicing motorcycle brake master cylinders.
• For replacing motorcycle fork oil seals (circlips).
• For use with any internal circlips up to 56mm deep.

QS70760 Benefits

• Long 56mm JawsAllow access to circlips in deep cavities that are inaccessible to conventional pliers.
• Spring MechanismAutomatic return of handles to the starting position for ease of use and reduced fatigue.
• Precise 90° Jaw AngleCurved jaws provide direct access to the circlip deep inside the cylinder without the need to tilt the tool.

Frequently Asked Questions

• Are these pliers suitable for motorcycle master cylinders?Yes, these pliers are specifically designed to work with hydraulic clutch and brake master cylinders on motorcycles.
• What is the maximum access depth?The jaw length is 56mm, allowing you to work with circlips at depths of up to 56mm.
• Can these pliers be used for external circlips?No, these pliers are designed for internal circlips only. A different type of pliers is required for external circlips.
• What is the warranty for the QS70760 pliers?The tool is guaranteed for 12 months against manufacturing defects, provided it is used professionally.