Fuel pipe clamp set (4 pcs.) QUATROS QS14230

Description Fuel pipe clamp set (4 pcs.) QUATROS QS14230

A hose clamp set (4 pcs.) designed for safe shut-off of fluid flow in fuel, brake, and other lines with hoses ranging from 10–45 mm in diameter.

Article: QS14230

Functional Purpose

This clamp set is designed for the safe shut-off of fluid flow in fuel, brake, vacuum, and cooling system hoses.

Package Contents

4 clamps: Ø10 mm, Ø15 mm, Ø25 mm, Ø45 mm. These clamps cover most hoses commonly found in a car.

Compatible Fluids

Fuel, brake fluid, transmission fluid, antifreeze, vacuum lines.

Description QS14230

The QS14230 hose clamp set is a professional tool for workshops that perform work on fuel systems, brake systems, cooling systems, and other hose connections. This set contains 4 clamps of different diameters: 10 mm, 15 mm, 25 mm, and 45 mm, allowing you to block the flow in various hose sizes.

Replacing a fuel filter or brake hose without these clamps often leads to fluid leakage, air entering the system, and contamination of the workplace. The QS14230 set completely solves this problem: simply clamp the hose with a suitable clamp, and the fluid flow will be reliably blocked. This allows you to perform work without completely draining the entire system.

Technical Specifications

⚠️ Important: Do not over-clamp the hoses, as this can damage their internal structure. Always use a clamp of the appropriate diameter.

Kit Contents

When to Use This Kit

• When replacing the fuel filter (to clamp fuel hoses).
• When replacing brake hoses or calipers.
• To clamp cooling system hoses when replacing the radiator.
• When working with automatic transmission hoses.
• For any work requiring temporary fluid flow blockage in a hose.

Advantages of QS14230

4 sizes

They cover the range of 10–45 mm — from thin vacuum hoses to thick cooling pipes.

Versatility

Suitable for all types of fluids: fuel, brake, transmission, antifreeze.

Safety

Allows you to work without draining the entire system, saving time and fluids.

Frequently Asked Questions

Are they suitable for brake hoses?

Yes, small diameter clamps (10–15 mm) are ideal for clamping brake hoses when replacing calipers.

Do clamps damage hoses?

When used correctly (without over-clamping), the clamps do not damage hoses. They are designed for safe flow shut-off.

Are they suitable for high-pressure fuel hoses?

The clamps are designed for low-pressure hoses. Special equipment is required for high-pressure lines (e.g., Common Rail).

What is the warranty on the QS14230 set?

The tool is guaranteed for 12 months against manufacturing defects under professional use.