Set of repair stands with a thrust heel (310-478 mm) 3t JCB Tools JCB-TH53013

Description Set of repair stands with a thrust heel (310-478 mm) 3t JCB Tools JCB-TH53013

Safety above all! These stands can withstand 3 tons and allow for errors. Work under the vehicle calmly — even if the jack fails, the insurance will work.

Made of seamless pipe with a diameter of 50 mm and a wall thickness of 3.5 mm — this is 30% stronger than conventional welded counterparts. The yellow stand is 3 mm thick, and the support cup is 8 mm! No cracks, no deformations.

JCB: steel that holds 3 tons. And your trust.

KEY ADVANTAGES

Seamless pipe 50 mm
The three legs are made of solid (seamless) pipe with a wall thickness of 3.5 mm. This means that there are no welds here — the weakest point of conventional stands. Solid strength.

8 mm cup and 14 mm cotter pin
The U-cup support is 8 mm thick — providing armor for your vehicle. The 14 mm diameter locking pin passes through the upright, ensuring that the height will not change accidentally.

3-support design
Three legs, not four — it’s no coincidence. The three-point support stands perfectly even on uneven floors, without wobbling or “playing.” Say goodbye to concrete pits and cracks!

Adjustment 310-478 mm
Wide height range: from low-profile sports cars to high SUVs. The adjustment steps allow for precise positioning at any lifting point.

Anti-corrosion coating
High-quality powder coating. The stands are resistant to moisture, grease, and chemicals. They look like new even after years of operation in a cold garage.

Total weight of the set 5.9 kg
These stands are not light, but also not excessively heavy. The optimal weight indicates the use of thick metal, not thin sheet metal. You can feel the reliability of each part.

Strong packaging
Each stand is packed in laminated cardboard with a vertical seam, fastened with metal staples. They reach the customer without scratches or damage.

TECHNICAL SPECIFICATIONS

FULL SET

Set contents:
Repair stand (tripod) — 2 pcs

Completely ready for use: no assembly required, just take them out of the box.

SAFETY AND OPERATION

Safety element: Stands are used ONLY in conjunction with a jack. The vehicle is first lifted with a jack, then the stands are positioned, and only then is the vehicle lowered onto them. Never use the stands for lifting!

Checking the fixation: Before loading, ensure that the pin is fully inserted into the stand's hole and securely fixed. It must hold the weight.

Flat surface: Tripod stands can tolerate minor irregularities, but they should be installed on a solid, stable base (concrete, asphalt). Do not use on soft ground.

Placement under vehicle: Install stands only under reinforced body elements (sills, beams, jacking points). Do not place them under plastic components, the vehicle floor, or the fuel tank.

Do not exceed the load: The maximum for a SET (2 pcs) is 3 tons. Do not load a single stand with more than 1.5 tons.

Inspection before use: Check for deformations, cracks, and corrosion. Pay special attention to the connection of the legs to the base.

PACKAGING INFORMATION

Thanks to the sturdy packaging, the stands reach you without scratches, ready for immediate use.

WHO ARE THESE SAFETY STANDS FOR?

Auto mechanics: For daily work with various vehicles, requiring reliable support that won't fail under load.

Private car owners: For DIY repairs in the garage, such as changing oil, brakes, or suspension, where safety is paramount.

Sports teams: For quick pit stops and suspension adjustments, requiring stands that are both light and strong.

Tire fitting shops: For additional safety when removing wheels, protecting against vehicle falls.

JCB: SAFETY YOU CAN TRUST

Metal thickness: 8 mm. Seamless pipe: 50 mm.

JCB-TH53013: Holds 3 tons, stands on three legs.

#JCBSafetyFirst