Automatic motor protection switch 3p 2.5A Z-MS-2.5/3 EATON

Description Automatic motor protection switch 3p 2.5A Z-MS-2.5/3 EATON

Type of device: Automatic vimikach zahistu dviguna
Model: Z-MS-2.5/3
Virobnik: EATON
Nominal range of the heat dispenser: 1.6-2.5 A
Number of poles: 3
Strum mittevoy spritsovuvannya (magnetic sputter): 38.75 A
Rated operating voltage Ue: 690 V AC
Nominal impulse voltage Uimp: 6 kV
Nominal insulation voltage Ui: 690 V
Nominal limit short-circuit voltage Icu at 230 V AC: 100 kA
Rated short-circuit limiting capacity Icu at 400 V AC: 100 kA
Rated short-circuit limiting capacity Icu at 440 V AC: 10 kA
Rated short-circuit limiting capacity Icu at 500 V AC: 6 kA
Rated short-circuit limiting capacity Icu at 690 V AC: 3 kA
Frequency: 50/60 Hz
Class of dispensing: 10
Mechanical wear resistance: 100,000 cycles
Electrical wear resistance: 100,000 cycles
Housing protection level: IP20
Terminal protection level: IP00
Terminal type: Gvintovi
Cross-cut of the connected single-core conductor: 1 x (1-6 mm²) or 2 x (1-2.5 mm²)
Cross-cut of the connected rich conductor with ferrule: 1 x (1-4 mm²) or 2 x (1-2.5 mm²)
Terminal tightening torque: 1.7 Nm
Mounting method: DIN rail 35 mm, screws
Ambient operating temperature range: -25°C to +55°C
Temperature range: -40°C to +80°C
Water content: 0-95% (non-condensing)
Height: 93 mm
Width: 45 mm
Glibin: 76 mm
Vaga: 0.26 kg
Compliance with standards: IEC/EN 60947-2, IEC/EN 60947-4-1, VDE 0660
Drying category: A