Automatic motor protection switch PKZM0-0.63A 150kA EATON

Description Automatic motor protection switch PKZM0-0.63A 150kA EATON

Nominal operating flow (Ie): 0.63 A
Range of regulation of the heat exchanger (thermal): 0.4 - 0.63 A
Strum of electromagnetic sprayer (mittevium): 8.82 A
Nominal operating voltage (Ue): 690 V AC
Nominal insulation voltage (Ui): 690 V AC
Nominal impulse voltage (Uimp): 6 kV
Number of poles: 3
Nominal borderline vimicious building capacity (Icu) at 230 V AC: 100 kA
Rated limiting voltage (Icu) at 400 V AC: 100 kA
Rated limiting voltage (Icu) at 440 V AC: 100 kA
Rated limiting voltage (Icu) at 500 V AC: 50 kA
Rated limiting voltage (Icu) at 690 V AC: 10 kA
Rated operating voltage (Ics) at 230 V AC: 100 KA
Rated operating voltage (Ics) at 400 V AC: 100 kA
Rated operating voltage (Ics) at 440 V AC: 100 kA
Rated operating voltage (Ics) at 500 V AC: 50 kA
Rated operating voltage (Ics) at 690 V AC: 10 kA
Maximum power supply voltage (depending on model): 150 kA
Frequency: 50/60 Hz
Uncloaking class: Class 10
Type of sputtering device: Thermal
Type of short circuit breaker: Electromagnetic
Protective steps (building will be added): IP20
Mounting type: DIN rail (EN 60715) / Screw
Terminal size (hard wire): 1 x (1-6 mm²) or 2 x (1-2.5 mm²)
Terminal size (wire with ferrule): 1 x (1-6 mm²) or 2 x (1-2.5 mm²)
Terminal tightening torque: 1.7 Nm
Temperature of the core (working): from -25 to +55 °C
Core temperature (preservation): from -40 to +80 °C
Height above the sea level: up to 2000 m
Electrical wear resistance: 0.5 x 10^6 cycles (AC-3, 400V)
Mechanical wear resistance: 0.5 x 10^6 cycles
Overall width: 45 mm
Overall height: 93 mm
Overall depth: 76 mm
Vaga: 0.25 kg
Power consumption per pole (at Ie): 0.4 W
Congested steps: 3
Compliance with standards: IEC/EN 60947-2, IEC/EN 60947-4-1, VDE 0660