Automatic motor protection switch PKZM0-25A 50kA EATON

Description Automatic motor protection switch PKZM0-25A 50kA EATON

Adjustment range of thermal sprayer: 20-25 A
Nominal operating voltage Ue: up to 690 V alternating current
Nominal insulation voltage Ui: 690 V
Nominal impulse voltage Uimp: 6 kV
Rated short-circuit limiting capacity Icu (230 V, 50/60 Hz): 50 kA
Nominal short-circuit limiting voltage Icu (400 V, 50/60 Hz): 50 KA
Nominal short-circuit limiting capacity Icu (440 V, 50/60 Hz): 50 kA
Rated short-circuit limiting capacity Icu (500 V, 50/60 Hz): 10 kA
Rated short-circuit limiting capacity Icu (690 V, 50/60 Hz): 10 kA
Rated operating voltage with short circuit Ics (230 V, 50/60 Hz): 50 kA
Nominal working short-circuit voltage Ics (400 V, 50/60 Hz): 50 kA
Rated short-circuit operating voltage Ics (440 V, 50/60 Hz): 50 kA
Rated short-circuit operating voltage Ics (500 V, 50/60 Hz): 10 kA
Rated short-circuit operating voltage Ics (690 V, 50/60 Hz): 10 kA
Electromagnetic sprayer setting: 350 A
Number of poles: 3
Sputter type: Thermomagnetic
Sensitivity to the end of the phase: So
Installation method: On DIN rail 35 mm; Gwent
Protection foot (front side): IP20
Protection level (clem): IP00
Core temperature (working): from -25 to +55 °C
Core temperature (preservation): from -40 to +80 °C
Mechanical service term: 0.1 x 10^6 operations
Electrical service term (category AC-3, 400 V): 0.1 x 10^6 operations
Conductor crossbar (hard): 1 x (1-6) mm², 2 x (1-6) mm²
Conductor crossbar (high core): 1 x (1-6) mm², 2 x (1-6) mm²
Conductor strut (fine-wire with ferrule): 1 x (1-4) mm², 2 x (1-4) mm²
Width: 45 mm
Height: 93 mm
Glibin: 76 mm
Vaga: 0.25 kg
Standards: IEC/EN 60947-4-1; IEC/EN 60947-2