Contactor CEM 80.00 230V AC ETI

Description Contactor CEM 80.00 230V AC ETI

Nominal coil voltage: 230 V AC
Coil frequency: 50/60 Hz
Tension of the coil when spraying: 180 VA
Tension of the coil when dampened: 18 VA
Number of head contacts: 3P
Auxiliary contact configuration: 1NO + 1NC
Nominal operating flow AC-1 (≤400V, θ≤55°C): 100 A
Nominal working stage AC-3 (380-400V): 80 A
Nominal engine tension AC-3 (380-400V): 37 kW
Nominal operating stage AC-4 (380-400V): 36 A
Nominal operating stage AC-1 (690V, θ≤55°C): 100 A
Nominal operating stage AC-3 (690V): 50 A
Nominal power of AC-3 motor (690V): 45 kW
Rated operating voltage Ue: up to 690 V AC
Nominal insulation voltage Ui: 1000 V
Nominal impulse voltage Uimp: 8 kV
Drying category: AC-1, AC-3, AC-4
Maximum head conductor span: 50 mm²
Minimum head conductor span: 16 mm²
Nominal power of auxiliary contacts: 10 A
Maximum crossbar of auxiliary contact conductor: 4 mm²
Minimum span of the conductor of auxiliary contacts: 1 mm²
Mechanical life: 10,000,000 cycles
Electrical life (AC-3): 1,000,000 cycles
Hour of operation (on): 10-25 ms
Opening hour: 10-20 ms
Operating temperature range: -25°C to +55°C
Storage temperature: -55°C to +80°C
Protection level: IP20
Installation method: Screw fastening
Terminal type: Gvintovi
Height: 148 mm
Width: 97 mm
Glibina: 147 mm
Vaga: 1.85 kg
Appearance standard: IEC/EN 60947-4-1