Contactor DILEM-10 (220V50/60HZ) EATON

Description Contactor DILEM-10 (220V50/60HZ) EATON

Nominal operating stage AC-3, 400V: 4 A
Nominal operating power AC-3, 220-230V: 0.75 kW
Rated operating power AC-3, 380-400V: 1.5 kW
Nominal operating power AC-3, 660-690V: 2.2 kW
Nominal heat source AC-1, 220-690V: 20 A
Rated operating voltage Ue: up to 690 V AC
Control coil voltage Uс: 220 V AC
Coil frequency control: 50/60 Hz
Number of head contacts: 3 NO (normally open)
Number of additional contacts: 1 NO (normally open)
Drying category: AC-1, AC-3
Nominal impulse voltage Uimp: 6000 V
Nominal insulation voltage Ui: 690 V
Housing protection level: IP20
Electrical wear resistance (AC-3): 1.3 x 10^6 cycles
Mechanical Wear resistance: 20 x 10^6 cycles
Range of operating temperatures in the middle: from -25 to +50 °C
Saving temperature range: -40 to +80 °C
Mounting type: On DIN rail 35 mm or screw
Type of electrical connection: Screw terminals
Reduced tension of the coil (retraction): 20 VA
Increased tension of the cat (morning): 5.5 VA
Maximum switching frequency (AC-3): 900 cycles/year
Maximum switching frequency (AC-1): 3000 cycles/year
Crossbar of the connected conductor (head terminals): 1 x (1-6 mm²) or 2 x (1-2.5 mm²)
Crossbar of the connected conductor (auxiliary/ceramic terminals): 1 x (0.75-4 mm²) or 2 x (0.75-2.5 mm²)
Tightening torque (head clamps): 0.8 Nm
Tightening torque (auxiliary/ceramic terminals): 0.8 Nm
Compliance with standards: IEC/EN 60947-4-1, VDE 0660
Height: 57.5 mm
Width: 45 mm
Glibina: 58 mm
Vaga: 0.17 kg