Contactor DILMT50 (230V50HZ/240V60HZ) EATON

Description Contactor DILMT50 (230V50HZ/240V60HZ) EATON

Product type: Contactor for switching capacitors
Model: DILMT50
Number of poles: 3
Coil voltage: 230 VAC, 50 Hz / 240 VAC, 60 Hz
Category of voltage: AC-6b
Nominal operating voltage (Ue): up to 690 V changeover voltage
Nominal insulation voltage (Ui): 690 V changeover line
Nominal pulse vitrification voltage (Uimp): 6 kV
Nominal switching voltage capacitors (AC-6b, 400 V, 50 Hz): 28 kvar
Nominal switching voltage of capacitors (AC-6b, 440 V, 50 Hz): 30 kvar
Nominal switching voltage of capacitors (AC-6b, 525 V, 50 Hz): 35 kvar
Nominal switched voltage of capacitors (AC-6b, 690 V, 50 Hz): 40 kvar
Nominal operating current (AC-1, head contacts): 50 A
Integrated auxiliary contacts: 2 normal open (2NO) + 1 normally closed (1NC)
Nominal current of auxiliary contacts (AC-15, 220-240V): 10 A
Mechanical endurance: 5 million cycles
Electrical endurance (AC-6b, 28 kvar, 400V): 0.2 million cycles
Operating temperature range: -25°C to +60°C
Saving temperature range: -40°C to +80°C
Protection level: IP00 (main device), IP20 (with covers) terminal)
Installation method: On DIN rail 35 mm / Screw mounting
Conductor cut (head terminals, hard/high core): 1 x (1.5 - 16 mm²) / 2 x (1.5 - 10 mm²)
Conductor cut (head terminals, wired) tip): 1 x (1.5 - 16 mm²) / 2 x (1.5 - 6 mm²)
Circulation of conductor (coil/auxiliary terminals, hard/high-core): 1 x (0.75 - 4 mm²) / 2 x (0.75 - 2.5 mm²)
Cereration conductor (terminals of the coil/auxiliary, cord with tip): 1 x (0.75 - 2.5 mm²) / 2 x (0.75 - 2.5 mm²)
Tightening torque of terminals (head): 2.5 Nm
Tightening torque of terminals (coil/auxiliary): 0.8 Nm
Overall dimensions (height): 145 mm
Overall dimensions (width): 60 mm
Overall dimensions (depth): 140 mm
Weight: 1.2 kg
Compliance with standards: IEC/EN 60947-4-1, IEC/EN 60947-5-1