Contactor DILMT65 (230V50HZ/240V60HZ) EATON

Description Contactor DILMT65 (230V50HZ/240V60HZ) EATON

Product type: Contactor
Model: DILMT65
Number of poles: 3
Nominal operating stage AC-1 (≤400 V): 80 A
Nominal operating stage AC-3 (400 V): 65 A
Rated operating power AC-3 (220 V, 230 V, 240 V): 18.5 kW
Rated operating power AC-3 (380 V, 400 V): 30 kW
Rated operating power AC-3 (440 V): 37 kW
Nominal working effort AC-3 (500 V): 37 kW
Rated operating power AC-3 (660 V, 690 V): 45 kW
Nominal impulse voltage (Uimp): 8 kV
Nominal insulation voltage (Ui): 690 V AC
Nominal operating voltage (Ue): 690 V AC
Nominal frequency: 50/60 Hz
Nominal short-circuit current (Iq): 100 kA (with fusible ignition 100A gG/gL)
Nominal short-hour vitrification strum (Icw) for 1 s: 900 A
Nominal coil voltage (Us) 50 Hz: 230 V AC
Nominal coil voltage (Us) 60 Hz: 240 V AC
The tension of the coil is reduced (attraction) 50 Hz: 150 VA
Reduced tension of the cat (morning) 50 Hz: 15 VA
The tension of the coil is reduced (attraction) 60 Hz: 150 VA
Reduced tension of the cat (morning) 60 Hz: 15 VA
Range of coil operating voltage (attraction): 0.8 - 1.1 x Us
Coil operating voltage range (discount): 0.3 - 0.6 x Us
Hour of exposure (attraction): 10-22 ms
Vimknennya (skidannya) workout hour: 8-15 ms
Added additional contacts: 1 N.V. + 1 N.Z.
Nominal operating current of auxiliary contacts AC-15 (230 V): 6 A
Nominal operating current of auxiliary contacts DC-13 (220 V): 0.6 A
Mechanical life: 10 million cycles
Electrical life (AC-3, 400 V): 1.5 million cycles
Temperature of the core (working): -25°C to +60°C
Temperature of the midstream (preservation): -40°C to +80°C
Installation position: Either way
Protection level IP (terminal): IP00
Protection step IP (with installed cover): IP20
Installation method: DIN rail 35 mm or screw fastening
Overall dimensions (WxHxD): 70 x 135 x 122 mm
Vaga: 1.1 kg
Terminal type: Screw terminals
Overcut of head terminals (single-core): 1 x (10-50) mm² or 2 x (10-16) mm²
Overcut of head terminals (high-core): 1 x (10-50) mm² or 2 x (10-16) mm²
Moment Head terminal tightening: 4 Nm
Overcut of coil terminals and auxiliary contacts (single-core): 1 x (0.75-4) mm² or 2 x (0.75-2.5) mm²
Overcut of coil terminals and auxiliary contacts (high-core): 1 x (0.75-4) mm² or 2 x (0.75-2.5) mm²
Tightening torque for coil terminals and auxiliary contacts: 1.2 Nm
Appearance standards: IEC/EN 60947, VDE 0660, UL, CSA