Contactor Z-SCH230/25-20 EATON

Description Contactor Z-SCH230/25-20 EATON

Nominal operating flow (AC-1): 25 A
Nominal operating flow (AC-7a): 25 A
Nominal operating flow (AC-7b): 9 A
Nominal operating voltage of head contacts: 230 V AC
Nominal operating voltage of head contacts: 400 V AC
Nominal coil voltage: 230 V AC
Coil voltage type: AC
Frequency: 50/60 Hz
Number of head normally open (NO) contacts: 2
Number of heads normally closed (NC) contacts: 0
Number of additional normally open (NO) contacts: 0
Number of additional normally closed (NC) contacts: 0
Nominal insulation voltage (Ui): 440 V
Nominal impulse voltage (Uimp): 4 kV
Stacking category: AC-1, AC-7a, AC-7b
Maximum switched power (AC-1, 230V): 5.75 kW
Maximum switching voltage (AC-1, 400V): 10 kW
Maximum switching power (AC-3, 230V): 4 kW
Maximum switching power (AC-3, 400V): 7.5 kW
Electrical wear resistance (AC-7a): 100,000 cycles
Mechanical wear resistance: 1,000,000 cycles
Operating temperature range: -25...+50 °C
Temperature range: -40...+80 °C
Protection level: IP20
Mounting type: 35 mm DIN rail
Maximum conductor span (hard): 10 mm²
Maximum conductor strut (wire with ferrule): 6 mm²
Terminal tightening torque: 1 Nm
Width: 36 mm
Height: 85 mm
Glibin: 60 mm
Number of modules: 2
Vaga: 0.22 kg
Compliance with standards: IEC/EN 61095