Additional contact Z-HK EATON

Description Additional contact Z-HK EATON

Possible contact configurations: 1NO, 1NC, 1NO+1NC, 2NO, 2NC
Nominal operating voltage of the exchanger (Ue AC): Up to 690 V
Nominal operating voltage of constant current (Ue DC): Up to 250 V
Nominal insulation voltage (Ui): 690 V
Nominal impulse voltage (Uimp): 6 kV
Vikoristan category: AC-15, DC-13
Nominal operating flow (Ie) for AC-15 at 230 B: 3 A
Nominal operating flow (Ie) for AC-15 at 400 V: 2 A
Nominal operating flow (Ie) for AC-15 at 690 V: 1 A
Nominal operating flow (Ie) for DC-13 at 24 V: 1 A
Nominal operating flow (Ie) for DC-13 at 110 V: 0.22 A
Nominal operating flow (Ie) for DC-13 at 220 V: 0.1 A
Minimum switching current: 10 mA
Minimum switched voltage: 17 V
Type clem: Gwent clem
Conductor overcut (hard): 0.5 - 2.5 mm²
Conductor overcut (bend): 0.5 - 2.5 mm²
Terminal tightening torque: 0.8 Nm
Contact material: Wood alloys
Mechanical wear resistance: 5 x 10^6 cycles
Electrical wear resistance: 0.5 x 10^6 cycles
Installation method: Screw installation
Protection level: IP20
Operating temperature range: Від -25 °C to +60 °C
Saving temperature range: -40 °C to +80 °C
Water content: 5 - 95% (non-condensing)
Maximum operating altitude above the level of the sea: 2000 m
Congested steps: 3
Impact support (robot): 15 g (11 ms, sinusoidal)
Vibration reference (robot): 5 g (10-500 Hz)
Width: 9 mm
Height: 29.8 mm
Glibina: 73.5 mm
Performance standards: IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14