Automatic motor protection switch 3p 10A Z-MS-10/3 EATON

Description Automatic motor protection switch 3p 10A Z-MS-10/3 EATON

Number of poles: 3
Nominal flow (In): 10 A
Range of thermal expansion (regulation): 6.3 - 10 A
Strum of the mitten rosette (magnetic): 140 A
Rated operating voltage (Ue): up to 690 V AC
Nominal insulation voltage (Ui): 690 V AC
Nominal impulse voltage (Uimp): 6 kV
Nominal short-circuit limit value (Icu) at 230/240 IN AC: 100 kA
Nominal short-circuit limiting capacity (Icu) at 400/415 V AC: 50 kA
Nominal short-circuit limiting capacity (Icu) at 500 V AC: 10 kA
Nominal short-circuit limiting capacity (Icu) at 690 V AC: 3 kA
Application class: Class 10
Protection level (housing): IP20
Mounting type: DIN rail (35 mm)
Retin connects conductors (single-core): 1 x (1-10 mm²) or 2 x (1-6 mm²)
The crossbar is connected to conductors (high-core): 1 x (1-6 mm²) or 2 x (1-6 mm²)
The crossbar is connected to conductors (fine-wire with ferrule): 1 x (1-6 mm²) or 2 x (1-4 mm²)
Operating temperature range: -25 to +55 °C
Temperature range: -40 to +80 °C
Width: 45 mm
Height: 93 mm
Glibin: 76 mm
Vaga: 0.25 kg
Compliance with standards: IEC/EN 60947-2, IEC/EN 60947-4-1
Nominal frequency: 50/60 Hz
Electrical wear resistance: 100,000 cycles
Mechanical wear resistance: 100,000 cycles
Power supply per pole (at In): 2.8 W
Connection type: Screw terminals
Additional engine power (AC-3, 3 phases, 230 V): 2.2 kW
Additive for engine tension (AC-3, 3 phase, 400 V): 4 kW
Additional motor power (AC-3, 3 phases, 500 V): 5.5 kW
Additional engine power (AC-3, 3 phases, 690 V): 7.5 kW
Drying category: A (per IEC/EN 60947-2), AC-3 (per IEC/EN 60947-4-1)