Hager circuit breaker, for motor protection, Isetting=1.0-1.6A, 2.5M, MM506N

Description Hager circuit breaker, for motor protection, Isetting=1.0-1.6A, 2.5M, MM506N

Model: MM506N
Type of attachment: Automatic vibration pump for engine protection
Brand: Hager
Number of poles: 3
Nominal flow: 1.6 A
Adjustment range of thermal sprayer: 1.0-1.6 A
Sputter type: Thermomagnetic
Adjustment range of the electromagnetic spitter: 13 x In max (20.8 A)
Nominal operating voltage of the exchanger: 230/400/500/690 V AC
Nominal insulation voltage (Ui): 690 V
Nominal impulse voltage (Uimp): 6 kV
Rated short-circuit limiting capacity (Icu) @ 230 V AC: 100 kA
Rated short-circuit limiting capacity (Icu) @ 400 V AC: 100 kA
Rated short-circuit limiting capacity (Icu) @ 500 V AC: 100 kA
Nominal short-circuit limiting voltage (Icu) @ 690 V AC: 3 kA
Rated short circuit operating voltage (Ics) @ 230 V AC: 100 kA
Rated short circuit operating voltage (Ics) @ 400 V AC: 100 kA
Rated short-circuit operating voltage (Ics) @ 500 V AC: 100 kA
Rated short circuit operating voltage (Ics) @ 690 V AC: 3 kA
Thermal sprayer class: 10
Crossing of the connected hard cable: 1-6 mm²
Crossing of the connected cable: 1-4 mm²
Terminal tightening torque: 1.5 Nm
Mounting method: On DIN rail (35 mm)
Width of the device in modules: 2.5 M
Device width: 45 mm
Device height: 90 mm
Glibin of the device: 70 mm
Protection level IP (devices): IP20
Protection stage IP (front part with housing): IP40
Operating temperature: -20 to +60 °C
Temperature Saving: -40 to +80 °C
Mechanical wear resistance: 100,000 cycles
Electrical wear resistance: 10,000 cycles
Overvoltage category: III
Congested steps: 3
Maximum operating altitude: 2000 m
Compliance with standards: IEC/EN 60947-2, IEC/EN 60947-4-1