Tap and die set 32 ​​pcs. (M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75) WOKIN WK-334232

Description Tap and die set 32 ​​pcs. (M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75) WOKIN WK-334232

If you often work with thread cutting, this set will be worth its weight in gold. It is made of GCR15 material with heat treatment, which gives the tool exceptional strength and durability. The set covers all standard metric sizes from M3 to M12 and is designed for use in workshops, production, and at home.

Key benefits

Material GCR15 with heat treatment

Strength at the level of professional tools. Withstands serious loads when cutting both soft and hard materials without deformation.

7 main sizes + 3 spare taps

21 taps, 3 pieces per size, allow you to have a spare if one breaks in the middle of the job. Dies cover all typical diameters from M3×0.5 to M12×1.75.

Complete set of tools in the kit

In addition to taps and dies, you get a die holder, a tap handle, a screwdriver, and a thread pitch gauge — everything you need for work.

Package contents and packaging

21 GCR15 hardened steel taps (3 pieces each of sizes M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75), 7 dies of the same sizes, a zinc alloy die holder, a tap handle, a screwdriver, and a thread pitch gauge. Packed in a sturdy metal box. Total 32 items.

Do the taps break after 10-20 uses?

No, GCR15 taps are made of a material used for professional tools. With proper use (lubrication, correct rotation speed), one tap can withstand hundreds of holes. We recommend lubricating the tool during operation and removing the tap without taking risks — then the resource will be maximum. The set includes 3 taps of each size, so in case of any unforeseen situations, you always have a spare.

What thread pitch do the M10 and M12 dies work with?

The M10 die cuts threads with a pitch of 1.5 mm, and the M12 with a pitch of 1.75 mm. These are standard pitches for general-purpose metric threads. If you need a thread with a different pitch, you will need a specialized set with a fine pitch. The set includes a thread pitch gauge, with which you can check the result.

Need advice on choosing?

Our specialists will help you choose the right sizes and give advice on use.

Set of taps and dies 32 pcs. (M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75) — professional tool made of GCR15 material with heat treatment for thread cutting.