Contactor DILM300A/22(RA250) EATON

Description Contactor DILM300A/22(RA250) EATON

Nominal operating flow AC-3 (Ue ≤ 440 V): 300 A
Nominal operating flow AC-1 (Ue ≤ 690 V, θ ≤ 40°C): 400 A
Number of head poles: 3
Number of additional contacts (normally open): 2
Number of auxiliary contacts (normally closed): 2
Rated operating voltage Ue: up to 1000 V AC
Nominal insulation voltage Ui (AC): 1000 V
Rated impulse voltage Uimp: 8 kV
Drying category: AC-1, AC-3
Nominal power of AC-3 motor (230 V): 90 kW
Nominal power of AC-3 motor (400 V): 160 kW
Nominal power of AC-3 motor (690 V): 220 kW
Coil type: Electronic, wide range AC/DC
Coil voltage range Us: 100-250 V AC/DC
AC coil frequency: 50/60 Hz
Spozhivana tension of the coil when retracted (AC): 34 VA
Increased tension of the coil when retracted (DC): 34 W
Reduced tension of the coil in the morning (AC): 10 VA
Reduced tension of the cat in the morning (DC): 2.6 W
Mechanical service life: 10 million cycles
Electrical service life AC-3: 1.5 million cycles
Maximum frequency of interruption (mechanical): 3000 cycles/year
Maximum frequency of interruptions (AC-3): 900 cycles/year
Head connection type: Screw terminals
Conductor cross-section of head coils (single-core/multi-core with ferrule): 50 - 185 mm²
Type of connection of auxiliary terminals: Screw terminals
Auxiliary wire conductor cross-section (single-core/multi-core): 0.5 - 2.5 mm²
Protective foot (side terminal): IP00
Protection step (on the side of the panel): IP20
Allowable core temperature (working): -25 ... +60 °C
Acceptable freezing temperature (zero temperature): -40 ... +80 °C
Appearance standards: IEC/EN 60947-4-1, VDE 0660
Width: 185 mm
Height: 270 mm
Glibina: 171 mm
Vaga: 8.6 kg
Power consumption per pole at Ie AC-3: 16.5 W