Contactor 25A, 2NV+2NC, 24V Hager ESD427

Description Contactor 25A, 2NV+2NC, 24V Hager ESD427

Virobu type: Contactor
Virobnik: Hager
Model: ESD427
Nominal operating flow (AC-1): 25 A
Nominal coil voltage: 24 V AC
Voltage frequency: 50/60 Hz
Number of head normally open (NO) contacts: 2
Number of head normally closed (NC) contacts: 2
Nominal operating voltage (Ue): 230/400 V AC
Nominal insulation voltage (Ui): 400 V
Nominal Impulse voltage (Uimp): 4 kV
Stacking category: AC-1
Switching power AC-1 at 230V: 5750 VA
Switching power AC-1 at 400V: 10000 VA
Increased tension of the coil during application: 25 VA
Reduced tension of the cat when morning: 4.6 VA
Electrical wear resistance (AC-1): 100,000 cycles
Mechanical wear resistance: 1000000 cycles
Application hour: 10-30 ms
Release hour: 10-30 ms
Number of modules: 2
Mounting type: DIN rail
Overcut of the connected hard conductor: 1.5 - 10 mm²
Cross-section of the connected wire conductor: 1.5 - 6 mm²
Terminal tightening torque: 1.2 Nm
Housing protection level: IP40
Terminal protection level: IP20
Operating temperature range: -10 to +50 °C
Temperature range: -40 to +70 °C
Height: 83 mm
Width: 35.7 mm
Glibin: 60 mm
Vaga: 0.22 kg
Compliance with standards: EN 61095, IEC 61095