Contactor 25A, 4HB, 24V Hager ESD425

Description Contactor 25A, 4HB, 24V Hager ESD425

Virobu type: Contactor
Model: ESD425
Virobnik: Hager
Number of head contacts: 4
Head contact configuration: Normally open (NV / NO)
Nominal flow (AC-1): 25 A
Nominal head voltage (Ue): 230 V AC / 400 V AC
Power supply (coil): 24 V AC
Increased coil tension (on): 2.7 VA
Increased tension of the cat (morning): 2.7 VA
Frequency: 50/60 Hz
Nominal impulse voltage (Uimp): 4 kV
Nominal insulation voltage (Ui): 400 V
Mechanical wear resistance: 1,000,000 cycles
Electrical wear resistance (AC-1): 100,000 cycles
Maximum switching frequency: 100 cycles/year
Protection level (clem): IP20
Operating temperature range: -5 to +40 °C
Temperature range: -40 to +70 °C
Overcut of conductors (head terminals, hard): 1 to 6 mm²
Overcut of conductors (head terminals, wire): from 1 to 4 mm²
Overcut of conductors (coil terminals, hard): from 0.75 to 2.5 mm²
Overcut of conductors (coil terminals, wire): from 0.75 to 2.5 mm²
Tightening torque (head clamps): 0.8 Nm
Tightening torque (coil clamp): 0.8 Nm
Mounting type: DIN rail
Width (DIN modules): 2
Extension height: 83 mm
Glibin for extension: 60 mm
Compliance with standards: EN 61095