Hager switch, case-mounted with motor drive I-0-II, 4p, 1250A, HIB491M

Description Hager switch, case-mounted with motor drive I-0-II, 4p, 1250A, HIB491M

Type of virobu: Peremikach mezhi with motor drive
Article: HIB491M
Virobnik: Hager
Number of poles: 4P
Mixing configuration: I-0-II
Nominal flow In: 1250 A
Rated operating voltage Ue AC: 400/690 V
Nominal insulation voltage Ui: 1000 V
Nominal impulse voltage Uimp: 8 kV
Frequency: 50/60 Hz
Drying category AC: AC-22B
Drying category AC: AC-23B
Nominal flow of short-hour vitrification Icw (1 s): 25 kA
Nominal shock current Ipk: 50 kA
Power supply voltage for motor drive: 230 V AC
Pressure per pole: 11 W
Connection type: Direct
Maximum connection over-cut (stranded cable): 2x185 mm²
Maximum connection overcut (hard cable): 2x240 mm²
Terminal tightening torque: 40 Nm
Mechanical Wear resistance: 10,000 cycles
Electrical wear resistance (AC-22B): 3000 cycles
Electrical wear resistance (AC-23B): 1500 cycles
Installation method: On a mounting plate
Protection level (clem): IP20
Protection step (front part, when installed in the cabinet): IP40
Width: 280 mm
Height: 442 mm
Glibina: 180 mm
Vaga: 21.6 kg
Operating temperature range: -25 to 70 °C
Temperature range: -40 to 80 °C
Maximum operating altitude above the sea level: 2000 m
Compliance with standard: EN 60947-3
Compliance with standard: EN 60947-6-1