Contactor DILM 12-10 24V 50/60Hz EATON

Description Contactor DILM 12-10 24V 50/60Hz EATON

Nominal operating stage AC-3 (400V): 12 A
Nominal operating power AC-3 (220/230V): 3 kW
Nominal operating power AC-3 (380/400V): 5.5 kW
Nominal operating power AC-3 (440V): 6.5 kW
Rated operating voltage AC-3 (500V): 7.5 kW
Nominal operating power AC-3 (660/690V): 7.5 kW
Nominal thermal stream AC-1 (basic circuit, θ ≤ 60 °C): 22 A
Nominal insulating voltage Ui: 690 V
Nominal impulse voltage Uimp: 6 kV
Rated operating voltage Ue: up to 690 V AC
Nominal coil voltage Uc: 24 V AC
Coil frequency: 50/60 Hz
Coil operating voltage range (50 Hz): 0.8 - 1.1 x Uc
Coil operating voltage range (60 Hz): 0.8 - 1.1 x Uc
The tension of the cat has been alleviated (retraction, 50/60 Hz): 60 VA
Reduced tension of the cat (morning, 50/60 Hz): 5 VA
Number of head normally open (NO) contacts: 3
Number of head normally closed (NC) contacts: 0
Number of added additional NV contacts: 1
Number of added auxiliary NC contacts: 0
Nominal flow of auxiliary contacts AC-15 (220/230V): 6 A
Nominal voltage of auxiliary contacts AC-15 (380/400V): 3 A
Nominal current of auxiliary contacts DC-13 (220V): 0.2 A
Mechanical life: 10 million cycles
Electrical life (AC-3, 400V): 1.5 million cycles
Protection level (front panel): IP20
Operating temperature range: -25 °C to +60 °C
Saving temperature range: -40 °C to +80 °C
Maximum altitude above the sea level: 2000 m
Mounting type: DIN rail 35 mm or screws
Overall width: 45 mm
Overall height: 75 mm
Overall depth: 106 mm
Vaga: 0.35 kg
Head wire crossbar (hard, min/max): 1 - 6 mm²
Reinforcement of head wires (wire with ferrule, min/max): 1 - 6 mm²
Crossing of additional wires (hard, min/max): 0.75 - 10 mm²
Crossing of additional wires (wire with ferrule, min/max): 0.75 - 6 mm²
Maximum short circuit protection (for head circuits, gG): 35 A
Compliance with standards: IEC/EN 60947
Drying category: AC-1, AC-3