Add. contact DILM150-XHI20 EATON

Description Add. contact DILM150-XHI20 EATON

Type of contactor: Additional contact block
Model: XHI20
Contactors: DILM series contactors (DILM7 to DILM150)
Contact configuration: 2 normally open (2NO)
Mounting method: Frontal
Nominal insulation voltage (Ui): 690 V changeover voltage
Nominal impulse vistimation voltage (Uimp): 6 kV
Nominal operating stage (Ie) at AC-15, 220-240 V: 4 A
Nominal worker flow (Ie) at AC-15, 380-440 V: 4 A
Nominal operating flow (Ie) at AC-15, 500 V: 2 A
Nominal operating flow (Ie) at AC-15, 690 V: 1 A
Nominal operating flow (Ie) at DC-13, 24 V: 1 A
Nominal operating flow (Ie) at DC-13, 110 V: 0.3 A
Nominal operating flow (Ie) at DC-13, 220 V: 0.15 A
Minimum contact pressure: 17 V / 5 mA
Type of clamps: Screw
Circuit of conductor (solid core, xv/max): 0.75 - 2.5 mm² (for 1 or 2 conductors)
Over-cut of conductor (high-core, with tip, xv/max): 0.75 - 2.5 mm² (for 1 or 2 conductors)
Operating temperature: -25 to +60 °C
Saving temperature: -40 to +80 °C
Protection level: IP20
Mechanical wear resistance: 10 x 10^6 cycles (10 million cycles)
Maximum switching frequency: 5000 operations per year
Maximum short circuit protection: 6 A, type gG/gL
Compliance with standards: IEC/EN 60947-5-1