Automatic motor protection switch PKZM01-1.6A 50kA EATON

Description Automatic motor protection switch PKZM01-1.6A 50kA EATON

Nominal flow (adjustment range): 1.0 - 1.6 A
Number of poles: 3
Nominal operating voltage (Ue): up to 690 V alternating current
Nominal impulse voltage (Uimp): 6 kV
Nominal insulation voltage (Ui): 690 V
Rated limit switching capacity (Icu) at 230 V: 50 kA
Rated limit switching capacity (Icu) at 400/415 V: 50 kA
Rated limit switching capacity (Icu) at 500 V: 10 kA
Rated limit switching capacity (Icu) at 690 V: 10 kA
Rated operating switching capacity (Ics) at 230 V: 50 kA
Rated operating switching capacity (Ics) at 400/415 V: 50 kA
Rated operating switching capacity (Ics) at 500 V: 10 kA
Nominal operating switching capacity (Ics) at 690 V: 10 kA
Magnetic release: 14 x Iu (22.4 A)
Wiki category: A
Frequency: 50/60 Hz
Protection level IP: IP20
Operating temperature range: -25 to +55 °C
Temperature range: -40 to +80 °C
The crossbar is connected to conductors (single-core, 1 wire): 1 - 6 mm²
The crossbar is connected to conductors (single-core, 2 wires): 1 - 2.5 mm²
The crossbar is connected to conductors (high-conductor, 1 wire): 1 - 6 mm²
The crossbar is connected to conductors (high-core, 2 wires): 1 - 2.5 mm²
The crossbar is connected to conductors (thin-wire with ferrule, 1 wire): 1 - 4 mm²
The crossbar is connected to conductors (thin-wire with ferrule, 2 wires): 1 - 2.5 mm²
Terminal tightening torque: 1.7 Nm
Mechanical wear resistance: 100,000 cycles
Electrical wear resistance: 100,000 cycles
Width: 45 mm
Height: 93 mm
Glibin: 76 mm
Vaga: 0.25 kg
Compliance with standard: IEC/EN 60947-1
Compliance with standard: IEC/EN 60947-2
Compliance with standard: IEC/EN 60947-4-1
Compliance with standard: UL 508
Compliance with standard: CSA C22.2 No. 14