Thread repair kit M10x1.5 QUATROS QS14187F

Description Thread repair kit M10x1.5 QUATROS QS14187F

Thread repair kit M10×1.5 for restoring damaged threads.

Set with drill, tap, installation tool and 10 wire inserts.

Article: QS14187F

Functional Purpose

A kit for repairing and restoring damaged or stripped M10×1.5 threads using wire inserts.

Package Contents

Drill, tap, insert installation tool, shank break-off tool, 10 wire thread inserts.

Steel Inserts

The restored thread becomes stronger than the original thanks to stainless steel inserts.

QS14187F Description

The M10×1.5 thread repair kit QS14187F is a professional kit for workshops that restore damaged medium-diameter threaded holes. This set includes everything you need: a drill bit for drilling a hole, a tap for cutting a new thread, an insert installation tool, a shank break-off tool and 10 stainless steel wire inserts.

A stripped M10×1.5 thread is often found in engine component mounts, gearboxes, brake systems, as well as in threaded holes in brackets and other critical components. Replacing the entire part can be expensive. The QS14187F completely solves this problem: the hole is drilled, a new thread is cut, into which a wire insert is screwed, restoring the original M10×1.5 size.

Specifications

⚠️ Important: Use lubricant when drilling. Make sure the hole is drilled straight, without skew. The length of the insert must match the depth of the hole.

Kit Contents

• Drill: 1 pc. – Drilling a damaged hole
• Tap: 1 pc. – Cutting a new thread for the insert
• Installation tool: 1 pc. – Screwing in a wire insert
• Break-off tool: 1 pc. – Removing the insert shank
• Wire threaded inserts: 10 pcs. – Repairing M10×1.5 threads

When to Use This Kit

• When M10×1.5 threads in body parts are stripped or damaged.
• To repair threads in engine, transmission, brake system, suspension, etc. mounts.
• When the bolt turns freely and does not tighten to the required torque.
• For thread repair on any part with M10×1.5 thread.

Benefits of QS14187F

Stronger Than Original: Stainless steel wire inserts create a thread that is more wear-resistant than the original.

Complete Kit: Everything you need to repair a single thread in one kit — from drill to inserts.

10 Inserts: Enough to repair multiple holes or for future use.

Frequently Asked Questions

Is it suitable for aluminum parts?

Yes, the set is ideal for thread repair on aluminum parts, where threads are most often damaged.

How many holes can be repaired?

The set contains 10 inserts, which is enough to repair up to 10 holes (one insert per hole).

Can the inserts be reused?

No, once installed, the insert becomes a permanent part of the threaded hole and is not intended for reuse.

What is the warranty on the QS14187F kit?

The tool is guaranteed for 12 months against manufacturing defects under professional use.