Thread repair kit M14x1.25 QUATROS QS14187K

Description Thread repair kit M14x1.25 QUATROS QS14187K

Thread repair kit M14×1.25 for restoring damaged threads.

Set with drill, tap, installation tool and 10 wire inserts.

Article: QS14187K

Functional purpose

A kit for repairing and restoring damaged or stripped M14×1.25 threads using wire inserts.

Package contents

Drill, tap, insert installation tool, shank break-off tool, 10 wire thread inserts.

Steel inserts

The restored thread becomes stronger than the original thanks to stainless steel inserts.

Description QS14187K

The QS14187K M14×1.25 Thread Repair Kit is a professional kit for workshops that repair damaged large diameter, fine pitch threaded holes. This kit contains everything you need: a drill bit for reaming the hole, a tap for cutting new threads, an insert setting tool, a shank breaking tool and 10 stainless steel wire inserts.

Stripped M14×1.25 threads are often found in engine component mounts, transmissions, brake calipers, and other critical components. Replacing the entire part can be expensive. The QS14187K completely solves this problem: the hole is reamed, a new thread is cut, and a wire insert is screwed into it, restoring the original M14×1.25 size.

Specifications

⚠️ Important: Use lubricant when drilling. Make sure the hole is drilled evenly, without skew. The length of the insert must match the depth of the hole.

Kit Contents

When this kit is used

• When the M14×1.25 thread in the body parts is stripped or damaged.
• To repair the thread in engine, transmission, or brake system mounts, etc.
• When the bolt turns freely and does not tighten to the required torque.
• For repairing threads in any parts with M14×1.25 threads.

QS14187K Benefits

Stronger than the original
Stainless steel wire inserts create threads that are more wear-resistant than the original.

Complete set
Everything you need to repair a single thread in one set, from drill to inserts.

10 inserts
Enough to repair multiple holes or for future use.

Frequently asked questions

Is it suitable for aluminum parts?
Yes, the set is ideal for repairing threads in aluminum parts, where threads are most often damaged.

How many holes can be repaired?
The set contains 10 inserts, which is enough to repair up to 10 holes (one insert per hole).

Can the inserts be reused?
No, once installed, the insert becomes a permanent part of the threaded hole and is not intended to be reused.

What is the warranty for the QS14187K set?
The tool is guaranteed for 12 months against manufacturing defects under professional use.