Thread repair kit M12x1.5 QUATROS QS14187H

Description Thread repair kit M12x1.5 QUATROS QS14187H

Thread repair kit M12×1.5 for restoring damaged threads

Set with drill, tap, installation tool and 10 wire inserts.

Article: QS14187H

Functional purpose: A kit for repairing and restoring damaged or stripped M12×1.5 threads using wire inserts.

Package contents: Drill, tap, insert installation tool, shank break-off tool, 10 wire thread inserts.

Steel inserts: The restored thread becomes stronger than the original thanks to stainless steel inserts.

Description QS14187H:

The M12×1.5 thread repair kit QS14187H is a professional kit for workshops that restore damaged medium-diameter threaded holes. This set contains everything you need: a drill bit for drilling a hole, a tap for cutting a new thread, an insert installation tool, a shank break-off tool, and 10 stainless steel wire inserts.

A stripped M12×1.5 thread is often found in engine component mounts, gearboxes, brake systems, as well as in threaded holes in wheel hubs and other critical components. Replacing the entire part can be expensive. The QS14187H completely solves this problem: the hole is drilled, a new thread is cut, into which a wire insert is screwed, restoring the original M12×1.5 size.

Specifications:

⚠️ Important: Use lubricant when drilling. Make sure the hole is drilled straight, without skew. The length of the insert must match the depth of the hole.

Kit Contents:

When using this kit:

• When M12×1.5 threads in body parts are stripped or damaged.
• To repair threads in engine, transmission, brake system, suspension, etc., mounts.
• When the bolt turns and does not tighten to the required torque.
• For thread repair on any part with M12×1.5 thread.

QS14187H Benefits:

Stronger than the original: Stainless steel wire inserts create a thread that is more wear-resistant than the original.

Complete set: Everything you need to repair a single thread in one set — from drill to inserts.

10 inserts: Enough to repair multiple holes or for future use.

Frequently asked questions:

Is it suitable for aluminum parts? Yes, the set is ideal for thread repair on aluminum parts, where threads are most often damaged.

How many holes can be repaired? The set contains 10 inserts, which is enough to repair up to 10 holes (one insert per hole).

Can the inserts be reused? No, once installed, the insert becomes a permanent part of the threaded hole and is not intended for reuse.

What is the warranty on the QS14187H set? The tool is guaranteed for 12 months against manufacturing defects under professional use.