Contactor DILM 15-10 (VDC24) EATON

Description Contactor DILM 15-10 (VDC24) EATON

Virobu type: Contactor
Virobnik: Eaton
Series: DILM
Model: DILM 15-10
Number of head poles: 3
Auxiliary contact configuration: 1 normally open (NO)
Nominal operating stage AC-3 (400V): 15 A
Nominal operating power AC-3 (400V): 7.5 kW
Nominal operating stage AC-1 (400V): 32 A
Nominal coil voltage (Us): 24 V DC
Nominal Impulse voltage (Uimp): 8000 V
Nominal insulation voltage (Ui): 690 V
Nominal operating voltage (Ue): 690 V
Thermal flow (Ith) for AC-1: 32 A
Recommended protection for short-circuit protection (head circuit, gG/gL): 35 A
Drying category: AC-1, AC-3
Nominal operating current of auxiliary contacts AC-15 (230V): 6 A
Nominal operating voltage of auxiliary contacts DC-13 (220V): 0.15 A
Coil type: Constant flow (DC)
Increased tension of the coil (retraction): 3.2 W
Increased tension of the cat (trimmed): 3.2 W
Coil voltage range: 0.8 - 1.15 x Us
Coil outlet voltage range: 0.1 - 0.7 x Us
Mechanical life: 10 million operations
Electrical life AC-3 (400V): 1.5 million operations
Maximum frequency commutation AC-3: 1800 operations/year
Hour of operation (on): 13 - 23 ms
Opening hour: 10 - 21 ms
Operating temperature range: -25 to +60 °C
Temperature range: -40 to +80 °C
Protection level: IP20
Mounting method: DIN rail / Screw
Cross-section of the conductors of the head lancet (hard): 1x(1-6 mm²), 2x(1-6 mm²)
Pererez conductors of the head lancet (bend with tip): 1x(1-10 mm²), 2x(1-6 mm²)
Cross-section of conductors of additional lance/coil (hard): 1x(1-6 mm²), 2x(1-6 mm²)
Cross-section of conductors of additional lance/coil (bend with tip): 1x(1-6 mm²), 2x(1-6 mm²)
Torque of tightening the head lance clamp: 1.2 Nm
Torque of tightening the terminals of the additional lance/coil: 1.2 Nm
Width: 45 mm
Height: 85 mm
Glibina: 107 mm
Vaga: 0.35 kg