Contactor DILM 17-10 24V 50/60Hz EATON

Description Contactor DILM 17-10 24V 50/60Hz EATON

Product series: DILM
Model: DILM 17-10
Number of head poles: 3
Auxiliary contact configuration: 1 normally open (1NO)
Nominal operating flow Ie (AC-3, 230V): 17 A
Nominal operating flow Ie (AC-3, 400V): 17 A
Nominal operating flow Ie (AC-3, 690V): 13 A
Nominal operating power P (AC-3, 230V): 4 kW
Nominal working power P (AC-3, 400V): 7.5 kW
Nominal operating power P (AC-3, 690V): 7.5 kW
Nominal operating flow Ie (AC-1, 690V): 32 A
Nominal insulation voltage Ui: 690 V
Nominal impulse voltage Uimp: 6 kV
Control coil voltage Uc: 24 V AC
Coil control frequency: 50/60 Hz
Reduced tension of the coil (retraction) AC: 60 VA
The tension of the cat has been reduced (morning) is active AC: 1.9 W
The tension of the cat has been reduced (morning) AC: 6 VA
Electrical wear resistance (AC-3): 1.5 million cycles
Mechanical wear resistance: 10 million cycles
Operating temperature range: -25 to +60 °C
Operating temperature range (in housing): -25 to +40 °C
Temperature range: -40 to +80 °C
Protection level IP (terminal): IP20
Protection level IP (housing): IP00
Max. conductor cross-cut (head circuit, hard, 1 conductor): 16 mm²
Max. conductor cross-cut (head circuit, hard, 2 conductors): 6 mm²
Max. conductor cross-cut (head circuit, cable with ferrule, 1 conductor): 10 mm²
Max. conductor cross-section (head circuit, cable with tip, 2 conductors): 4 mm²
Max. conductor overcut (additional circuit, hard, 1 conductor): 6 mm²
Max. conductor overcut (additional circuit, hard, 2 conductors): 4 mm²
Max. conductor overcut (additional circuit, cable with ferrule, 1 conductor): 4 mm²
Max. conductor overcut (additional circuit, cable with ferrule, 2 conductors): 2.5 mm²
Mounting type: DIN rail / screws
Width: 45 mm
Height: 85 mm
Glibina: 106 mm
Vaga: 0.35 kg
Compliance with standards: IEC/EN 60947-4-1
Congested steps: 3
Overvoltage category: III
Nominal short-circuit current Iq: 1 kA
Recommendations protection (short circuit protection, AC-1, gG/gL): 35 A
Recommended protection (short circuit protection, AC-3, gG/gL): 50 A