Contactor DILM 25-10 24V 50/60Hz EATON

Description Contactor DILM 25-10 24V 50/60Hz EATON

Product type: Contactor
Model: DILM 25-10
Virobnik: EATON
Number of power poles: 3
Number of normally open auxiliary contacts: 1 (1NO)
Number of normally closed auxiliary contacts: 0 (0NC)
Nominal operating stage AC-3 (400V): 25 A
Nominal operating power AC-3 (400V): 11 kW
Nominal operating stage AC-1 (400V): 45 A
Nominal voltage of the coil Uc: 24 V AC
Coil frequency: 50/60 Hz
Nominal insulation voltage Ui: 690 V
Nominal impulse voltage Uimp: 6 kV
Drying category: AC-1, AC-3
Mechanical wear resistance: 10,000,000 cycles
Electrical durability AC-3 (400V): 1,000,000 cycles
Range of operating temperatures in the middle: from -25 to +60 °C
Range temperature saving: from -40 to +80 °C
Protection level: IP20
Mounting method: On DIN rail 35 mm / Screw mounting
Type of electrical terminals: Screw terminals
Maximum overcut of power wires (bend): 10 mm²
Maximum overcut of power wires (hard): 16 mm²
Maximum overcut of cables (wire): 2.5 mm²
Maximum overcut of cables (hard): 4 mm²
Overall dimensions (Width x Height x Glibin): 45 x 85 x 101 mm
Masa: 0.48 kg
Reduced tension of the coil (retraction): 60 VA
Reduced tension of the cat (morning): 8 VA
Nominal short-hour vibration flow (1 s): 300 A
Recommended protection against short circuits (power lancug, gG/gL): 35 A