Contactor DILM115 RAC240 EATON

Description Contactor DILM115 RAC240 EATON

Virobnik: Eaton
Product type: Contactor
Series: DILM
Model: DILM115
Nominal operating flow Ie (AC-3, 220-230V): 115 A
Nominal operating flow Ie (AC-3, 380-400V): 115 A
Nominal operating flow Ie (AC-3, 415V): 115 A
Nominal operating flow Ie (AC-3, 500V): 115 A
Nominal operating flow Ie (AC-3, 690V): 100 A
Nominal operating strum Ie (AC-1, 690V): 160 A
Nominal operating power (AC-3, 220-230V): 37 kW
Nominal operating power (AC-3, 380-400V): 55 kW
Nominal operating power (AC-3, 415V): 63 kW
Nominal operating power (AC-3, 500V): 75 kW
Nominal operating power (AC-3, 690V): 90 kW
Number of head poles: 3
Added additional contacts: 1 NC + 1 NC
Type of coil voltage: AC (AC)
Nominal coil voltage Us: 240 V AC
Coil frequency: 50/60 Hz
Increased tension of the coil (retraction, 50/60 Hz): 220 VA
Reduced tension of the cat (morning, 50/60 Hz): 20 VA
Coil voltage range (AC): 0.8 - 1.1 x Us
Rated operating voltage Ue: up to 690 V AC
Nominal insulation voltage Ui: 1000 V
Nominal impulse voltage Uimp: 8 kV
Nominal short-hour vitrification flow (1s) Icw: 1600 A
Nominal short-hour vitrification flow (10s) Icw: 1200 A
Nominal short-hour vitrification flow (30s) Icw: 700 A
Nominal short-hour vitrification flow (60s) Icw: 500 A
Mechanical life: 10 million cycles
Electrical life (AC-3, 400V): 2.5 million cycles
Spending hour (vvmknennya): 16 - 38 ms
Hour of practice (vimknenna): 10 - 20 ms
Temperature of the superfluous core (operation): -25 to +60 °C
Temperature of the midstream (zberіgannya): -40 to +80 °C
Maximum altitude above the sea level: 2000 m
Water content: up to 95% (without condensation)
Protection stage (housing): IP00
Protection level (clem): IP00
Type of head terminals: Gvintovi klemy
Head terminal conductor crossbar (hard): 1 x (35 - 95 mm²), 2 x (35 - 70 mm²)
Head terminal conductor crossbar (bend): 1 x (35 - 95 mm²), 2 x (35 - 70 mm²)
Head terminal tightening torque: 12 Nm
Type of additional terminals: Screw terminals
Conductor crossbar for auxiliary terminals (hard): 1 x (0.75 - 4 mm²), 2 x (0.75 - 2.5 mm²)
Conductor crossbar for auxiliary terminals (wire): 1 x (0.75 - 4 mm²), 2 x (0.75 - 2.5 mm²)
Tightening torque of additional terminals: 0.8 Nm
Mounting type: On a 35 mm DIN rail or with screws
Width: 85 mm
Height: 158 mm
Glibina: 160 mm
Vaga: 2.1 kg
Appearance standards: IEC/EN 60947-4-1, UL/CSA
Max. interruption frequency allowed (AC-1): 900 operating cycles/year
Max. interruption frequency allowed (AC-3): 1200 operating cycles/year
Max. interruption frequency allowed (AC-4): 300 operating cycles/year