Contactor 40A, 4NV, 24V Hager ESD440

Description Contactor 40A, 4NV, 24V Hager ESD440

Nominal operating voltage (AC-1): 40 A
Nominal coil voltage (Uc): 24 V AC
Number of head contacts: 4
Type of head contacts: Normally open (4 NV)
Nominal operating voltage (Ue): 230/400 V AC
Nominal insulation voltage (Ui): 500 V
Nominal impulse withstand voltage (Uimp): 4 kV
Standing category: AC-1
Metering frequency: 50/60 Hz
Tightness relieved coils (switched on): 11.6 VA
Reduced coil tension (drying): 3.3 VA
Electrical wear resistance (AC-1): 200,000 cycles
Mechanical wear resistance: 1,000,000 cycles
Maximum switching frequency: 300 alternations/year
Modular width: 3 modules (53.5 mm)
Protection stage (terminals): IP20
Protection stage (housing): IP40 (after installation in a panel)
Range operating temperatures: -10 °C to +50 °C
Range temperature saving: -40 °C to +80 °C
Maximum overcut of the connected cable (hard): 25 mm²
Maximum overcut of the connected cable (flex): 16 mm²
Terminal tightening torque: 2.8 Nm
Type of clamps: Screw
Compliance with standards: IEC/EN 61095
Height: 83 mm
Width: 53.5 mm
Depth: 60 mm
Wague: 310 g
Grid class: 2