Description Thread repair kit M10x1.25 QUATROS QS14187E

Thread repair kit M10×1.25 for restoring damaged threads

Set with drill, tap, installation tool and 10 wire inserts.

Article: QS14187E

Functional purpose

A kit for repairing and restoring damaged or stripped M10×1.25 threads using wire inserts.

Package contents

Drill, tap, insert installation tool, shank break-off tool, 10 wire thread inserts.

Steel inserts

The restored thread becomes stronger than the original thanks to stainless steel inserts.

Description QS14187E

The QS14187E M10×1.25 Thread Repair Kit is a professional kit for workshops that repair damaged medium-diameter, fine-pitch threaded holes. This kit includes everything you need: a hole-drilling bit, a re-threading tap, an insert setting tool, a shank-breaking tool, and 10 stainless steel wire inserts.

Stripped M10×1.25 threads are common in engine, transmission, brake system component mounts, as well as in bracket and other critical parts. Replacing the entire part can be expensive. The QS14187E completely solves this problem: the hole is drilled, a new thread is tapped, and a wire insert is screwed into it, restoring the original M10×1.25 size.

Specifications

⚠️ Important: Use lubricant when drilling. Make sure the hole is drilled evenly, without skew. The length of the insert must match the depth of the hole.

Kit Contents

• Drill: 1 pc. – Drilling out a damaged hole
• Tap: 1 pc. – Cutting a new thread for the insert
• Installation tool: 1 pc. – Screwing in a wire insert
• Break-off tool: 1 pc. – Removing the insert shank
• Wire threaded inserts: 10 pcs. – Repairing M10×1.25 threads

When this kit is used

• When M10×1.25 threads are torn off or damaged in body parts.
• To repair threads in engine, transmission, brake system, suspension, etc. mounts.
• When the bolt is turned and not tightened to the required torque.
• To repair threads in any parts with M10×1.25 threads.

QS14187E Benefits

Stronger than the original

Stainless steel wire inserts create a thread that is more wear-resistant than the original.

Complete set

Everything you need to repair a single thread in one set - from drill to inserts.

10 inserts

Enough to repair multiple holes or for future use.

Frequently asked questions

Is it suitable for aluminum parts?

Yes, the set is ideal for repairing threads in aluminum parts, where threads are most often damaged.

How many holes can be repaired?

The set contains 10 inserts, which is enough to repair up to 10 holes (one insert per hole).

Can the inserts be reused?

No, once installed, the insert becomes a permanent part of the threaded hole and is not intended to be reused.

What is the warranty for the QS14187E set?

The tool is guaranteed for 12 months against manufacturing defects under professional use.